Renewable Design for White Fused Alundum Powder - Micro Sodium White Fused Alumina – Yufa
Renewable Design for White Fused Alundum Powder - Micro Sodium White Fused Alumina – Yufa Detail:
Compared With β-Al2O3 And α-Al2O3
Sodium oxide is a harmful impurity to white corundum. It forms β-Al2O3 with alumina in the molten state, and the amount of production increases with the increase of sodium oxide content. Na2O in white corundum mainly appears in the form of Na2O·11AL2O3 (β-Al2O3). For example, if the alumina raw material contains more than 0.6% sodium oxide, the white corundum produced with it will contain more than 10% β-Al2O3.
Compared with β-Al2O3, α-Al2O3 has ‘three highs’. First, it has a high melting point, Secondly a high density, and thirdly a high hardness, as shown in the following table:
| Phase | Chemical compositions | Crystal System | Density (g/cm3） | Micro hardness (Kg/mm²) | Melting point (℃) |
| α-Al2O3 | Al2O3 | Hexagonal | 4.0 | 2300 | 2050 |
| β-Al2O3 | Na2O·11Al2O3 | Trigonal | 3.24 | 1300~1600 | 1600 |
Chemical Composition
| Chemical Composition | Na2O % ≤ | Al2O3 % ≥ | SiO2 % ≤ | Fe2O3 % ≤ |
| Gurantee Value | 0.06 | 99.7 | 0.1 | 0.05 |
| Typical Value | 0.02 | 99.89 | 0.04 | 0.03 |
Advantages
The micro-sodium white fused alumina improves the melting point, particle density, bulk density, flexural strength, compressive strength, true density, hardness and other properties of white corundum products, laying a solid foundation for the product to enter the high-end market.
Applications
It is suitable for processing alloy steel, high hardness steel, high carbon steel and other materials with high hardness and high tensile strength.
Product detail pictures:
Related Product Guide:
We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for Renewable Design for White Fused Alundum Powder - Micro Sodium White Fused Alumina – Yufa , The product will supply to all over the world, such as: Canada, Australia, Bahamas, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By Elsie from Rwanda - 2017.11.20 15:58
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Jean Ascher from St. Petersburg - 2018.11.11 19:52
